designed & dimensioned in millimeters k do not scale from this print mptc-xx-xx-xx-6.30-xx-x-v-xx vertical plating specification -l: see table 3 -t: see table 3 -lc: locking clip (use lc-07-tm) (see fig. 2, sht 2) option -00, -01, -02, power pins (per end) -80 (4 x 20) -48 (4 x 12) -36 (4 x 9) -24 (4 x 6) -20 (4 x 5) -16 (4 x 4) -12 (4 x 3) -08 (4 x 2) -04 (4 x 1) signal pins -01, -02, ***-03, ***-04 (-03 & -04 available only with -00 on opposite end) power pins (per end) -01: for 1.57[.062] thick pcb (use sub-t-1m39-06.30-01-x) -02: for 3.18[.125] thick pcb (use sub-t-1m39-06.30-02-x) -03: for 2.36[.093] thick pcb (use sub-t-1m39-06.30-03-x) tail length -6.30: 6.30mm lead style * = see table 2 for available combinations ** = not tooled ***= not releasedfor production ** * * 12.45 .490 ref "e" ref 6.27 .247 4.45 (typ) .175 "f" "a" "a" c1 01 04 05 01 (power) -01 power 0.41 ref .016 11.38 ref .448 0.38 ref .015 0.50 .020 sq ref 1.87 - 0.05 + 0.13 .074 - .002 + .005 ? 1.00 .039 ref (typ) 1.27 .050 ref (typ) "h" 2.47 ref (typ) .097 1.88 .074 2.00 .079 ("j" eq spaces @ 2.0 [.079]) "g" 2 max sway (typ) "b" "b" "d" "d" section "a"-"a" c2 c4 t-1s68-xx-x c3 ** = not tooled *** = not released for production c5 "a" - 0.50 + 0.25 0.79 ref .031 5.08 ref .200 2.54 ref .100 3.68 .145 section "b"-"b" mpt-xx-06.30-v-80 sub-t-1m39-06.30-01-x c6 "b" 3.68 .145 6.00 .236 (3 eq spaces @ 2.00[.079] c8 section "d"-"d" c7 c fig. 1 mptc-01-80-01-6.30-01-x-v shown *** *** * sheet of unless otherwise specified, dimensions are in millimeters. tolerances are: decimals angles .x: 0.3 [.01] 2 .xx: 0.13 [.005] .xxx: 0.051 [.0020] material: vertical power terminal by: mptc-xx-xx-xx-6.30-xx-x-v-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing clay w 2/2/2007 3 1 sheet scale: 1:0.666667 insulator: lcp, color: black terminal: copper alloy signal pin: phos bronze f:\dwg\misc\mktg\mptc-xx-xx-xx-6.30-xx-x-v-xx-mkt.slddrw notes: 1. represents a critical dimension. 2. burr allowance: 0.038[.0015] max. 3. minimum pushout force: 2.22n [.5 lb]. 4. parts to be packaged in trays. 5. bow allowed at 0.002 mm/mm [.002 in/in] 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision k
1.42 - 0.13 + 0.20 .056 - .005 + .008 (2 plcs) 0.25 .010 "h" (see table 2) (measure at tips) 2 max sway (typ) "c" "c" lc-07-tm mpt-02-06.30-v-80-lc c9 c10 4.08 .161 ref fig. 2 mptc-01-80-01-6.30-01-x-v-lc shown (same as fig. 1, unless otherwise stated) "f" (see table 2) c1 -01 power -02 power 1.42 (typ) ref .056 section "c"-"c" "g" c3 mpt-04-06.30-v-80-lc fig. 3 mptc-02-80-02-6.30-01-x-v-lc shown (same as fig. 1, unless otherwise stated) *** = not released sheet of vertical power terminal by: mptc-xx-xx-xx-6.30-xx-x-v-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing clay w 2/2/2007 3 2 sheet scale: 1.5:1 revision k f:\dwg\misc\mktg\mptc-xx-xx-xx-6.30-xx-x-v-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
"e" "g" (5 eq spaces @ 2.0 [.079]) mpt-02-06.30-v-24-lc c11 c l fig. 4 mptc-01-24-01-6.30-01-x-v-lc shown (same as fig. 1, unless otherwise stated) "f" "h" c l c13 c12 "e" "g" (5 eq spaces @ 2.0 [.079]) c l c l mpt-04-06.30-v-24-lc c14 fig. 5 mptc-02-24-02-6.30-01-x-v-lc shown (same as fig. 1, unless otherwise stated) "h" "f" c15 c16 fig. 6 mptc-04-24-00-6.30-01-x-v shown (same as fig. 1, unless otherwise stated) "e" "h" mpt-04-06.30-v-24-ps sheet of vertical power terminal by: mptc-xx-xx-xx-6.30-xx-x-v-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing clay w 2/2/2007 3 3 sheet scale: 1.5:1 revision k f:\dwg\misc\mktg\mptc-xx-xx-xx-6.30-xx-x-v-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
